3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!
Sponsored by:
Sponsored by: DashLynx

First Vid Check it Out

Thread Tools
 
Search this Thread
 
Old 01-22-2008, 04:21 PM
  #46  
Registered User
 
SlowSixSpeed's Avatar
 
Join Date: Feb 2007
Location: Placerville, CA
Posts: 625
Likes: 0
Received 0 Likes on 0 Posts
Great job, I know these takes a long time to make.....but like I said last time you should include your speed since it's a better reflection of power since you have a 6 speed. I bet you have higher speed then some of the people you lost to, which kinda make's loosing not hurt so bad

How are you launching, and shifting?

Again great job and thanks for not blasting the music too loud (pet peave), you did it so you can still hear the engines A+
Old 01-22-2008, 04:29 PM
  #47  
Chapter President
Thread Starter
 
Fire Rescue124's Avatar
 
Join Date: Apr 2007
Location: Liberty Hill, Tx
Posts: 751
Likes: 0
Received 0 Likes on 0 Posts
i didn't think about putting the speeds on there but i will do it on the next one. my slowest speed of the night was 92.75 and my fastest was 93.97 and that was when i raced TCR his was 97.70 but as we all know he has a bit more done to his truck. anyway it may be a while before i race again i am with out my commander. it is being worked on By Justin at Quadzilla. great guys to work with and i just hope it can be fixed.
Old 01-22-2008, 04:54 PM
  #48  
tcr
Registered User
 
tcr's Avatar
 
Join Date: Sep 2003
Location: Austin, TX
Posts: 3,188
Likes: 0
Received 0 Likes on 0 Posts
You didn't show the breakage, why not, I can handle it. Not everyone has enough power to break billet outputs
Old 01-22-2008, 08:54 PM
  #49  
Registered User
 
TORQUE BEAST's Avatar
 
Join Date: Jun 2006
Location: Austin,Tx
Posts: 548
Likes: 0
Received 0 Likes on 0 Posts
shouldn't have watch it, now I want to go back and see what a boost launch will do I agree with tom, should showed the breakage!
Old 01-22-2008, 09:27 PM
  #50  
Chapter President
Thread Starter
 
Fire Rescue124's Avatar
 
Join Date: Apr 2007
Location: Liberty Hill, Tx
Posts: 751
Likes: 0
Received 0 Likes on 0 Posts
here you go so stop whinning. i also put the mph for each run so slowsixspeed will be happy too. so if you want anything else changed you can kiss my .


http://www.youtube.com/watch?v=t8CQElA1W0U
Old 01-22-2008, 09:32 PM
  #51  
Chapter President
Thread Starter
 
Fire Rescue124's Avatar
 
Join Date: Apr 2007
Location: Liberty Hill, Tx
Posts: 751
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by SlowSixSpeed
Great job, I know these takes a long time to make.....but like I said last time you should include your speed since it's a better reflection of power since you have a 6 speed. I bet you have higher speed then some of the people you lost to, which kinda make's loosing not hurt so bad

How are you launching, and shifting?

Again great job and thanks for not blasting the music too loud (pet peave), you did it so you can still hear the engines A+
I don't launch i take off normal but fast. i don't boost or slip the clutch at all on take off and normal fast shifting clutch all the way in and skinny pedal all the way out. not wanting to mess up the clutch. i think i am going with the OFE when i get a little money and the my commander is fixed.
Old 01-22-2008, 09:35 PM
  #52  
Registered User
 
TORQUE BEAST's Avatar
 
Join Date: Jun 2006
Location: Austin,Tx
Posts: 548
Likes: 0
Received 0 Likes on 0 Posts
that's better. good job eric, I forgot he was going against the vette with that output shaft broke.
Old 01-23-2008, 07:06 AM
  #53  
tcr
Registered User
 
tcr's Avatar
 
Join Date: Sep 2003
Location: Austin, TX
Posts: 3,188
Likes: 0
Received 0 Likes on 0 Posts
Eric, I think your doing great, until you have meats on the back, a boosted launch will do you no good. You will spin out all over the place.
As for the vette, she's was lucky I broke!!! Or maybe I was lucky I broke!
Next time we go we'll put my tires on the back of your trucks, a 13" wide Toyo apparently gets good traction, hence the breakage
Old 01-23-2008, 09:28 AM
  #54  
Chapter President
Thread Starter
 
Fire Rescue124's Avatar
 
Join Date: Apr 2007
Location: Liberty Hill, Tx
Posts: 751
Likes: 0
Received 0 Likes on 0 Posts
yeah i am still looking for some used slicks but they are not easy to come by so i think i will have to just buy new ones. didn't you say something like a 305/65-17? anyways i should know today if Quadzilla can fix my commander. if not i'm not sure if i will get another one or do regular gauges. i am thinks about doing the Boost fuel and rail in the center under the A/C and then the Pyro on the tree. and i am going to call up you boy in Marble Falls and see how much for the OFE and i should do the Hydrolic kit as well. Right?
Old 01-23-2008, 07:48 PM
  #55  
Chapter President
Thread Starter
 
Fire Rescue124's Avatar
 
Join Date: Apr 2007
Location: Liberty Hill, Tx
Posts: 751
Likes: 0
Received 0 Likes on 0 Posts
how do i make a link in my sig for my video's? do i need to use something other than youtube? anyway thanks for the help.
Old 01-23-2008, 07:48 PM
  #56  
Registered User
 
TORQUE BEAST's Avatar
 
Join Date: Jun 2006
Location: Austin,Tx
Posts: 548
Likes: 0
Received 0 Likes on 0 Posts
any word on the commander?
Old 01-23-2008, 11:30 PM
  #57  
Chapter President
Thread Starter
 
Fire Rescue124's Avatar
 
Join Date: Apr 2007
Location: Liberty Hill, Tx
Posts: 751
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by TORQUE BEAST
any word on the commander?
yeah its gone. Justin is going to see how much for me to just buy the display and if it is to much i will try and find one on here or just wait till i find a deal. what about yours?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
EQUIPPRO
GADTR #40
5
07-26-2009 07:16 PM
OldSmokey
3rd Gen High Performance and Accessories (5.9L Only)
19
07-22-2007 12:15 AM
RamNu2
3rd Gen High Performance and Accessories (5.9L Only)
23
05-09-2007 01:53 PM
spunbearing
Other
9
04-24-2006 06:56 PM



Quick Reply: First Vid Check it Out



All times are GMT -5. The time now is 03:03 AM.