I would like to purchase a set of F1 injectors for my truck. The problem is that there are no distributors in the midwest. I am not mechanic enough to tackle removing and replacing them myself and even if I was I have not been able to find any contact for F1 injectors except the distributors. As I understand it they have to be sent to Don M to be upgraded. I would have a local shop (Scheid) remove and replace them if I could only find out how to get them to Don M. If anyone can help with a phone number or address it would be greatly appreciated.

 

Search the members. He should be here under DonM. Send him a PM and wait for his response.

 

It's actually Don M, forgot the space

 

A D
I had already tried that and no Dom M on the member list. Looked again just to make sure but thanks anyway for the try.

 

https://www.dieseltruckresource.com/...er.php?u=18756

Try this.

 

Its Don M A 'n' at the end. Do a search on mach injectors. When you see him post just PM him from there.

 

A D
Sorry about that you were right he is there I thought I had gotten thru the list and I had not. Thanks again.

 

Jim,
I IM'd him the link for you.
He has some good stuff. Ask him for some F10's.... if you don't know what that means... check his website. Its funny!!!

 

Camotanker
I am not to hip to all the forum jargon. What does IMd a link for me mean? Yes I saw the F10 add that is wild!!!

 

MSN instant messanger. yahoo chat... not sure how else to explain it. sorry.

 

Camotanker
Thanks for the effort, I have also sent a request thru the administrator to try to contact him. Hopefully he will get one of the messages. He must be one busy guy. I sure wish he would set up a distributor here in the midwest it would make things a lot easier. Thanks for the help.
FarmerJim

 

hoehand
Did not mean to leave you out. Thanks for the info. I tried to send him an email but it was not allowed. Had to sent request thru the administrator. Hope it gets to him. Thanks again.
FarmerJim

 

I had mine installed at floor-it diesel in KC, kansas... 3.5 hrs from STL

 

I made 493hp/885tq yesterday w/ some of Don's injectors.. Me Likey!!!

 

Congratulations...