Edge EZ and Smarty JR stack
06-17-2009, 07:35 PM
#1
Registered User
Thread Starter
Join Date: Jan 2009
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Edge EZ and Smarty JR stack
Has anyone stacked the Edge EZ and Smarty JR ? I have the Jr and I run at sw3,tq2,tm4. I just borrowed my b-laws edge and was going to stack them but before I do that I just want to make sure I don't blow anything up 
. Thx
. Thx
06-18-2009, 12:51 AM
#2
Registered User
Join Date: Jul 2007
Location: West Linn, Oregon
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
I ran that exact stack for a few months. The only problem I had was torque converter shudder in lockup at WOT. On the dyno I put down 422hp/854tq with that stack. Just don't run the EZ on levels 2 or 3 very often---too much pressure to run all the time. Bad on the injectors.
06-18-2009, 11:41 AM
#3
Registered User
Thread Starter
Join Date: Jan 2009
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
I hooked up the EZ last night on level 3 and kept my smarty settings the same. It made a big difference in power. My truck seems to like it. I didn't notice any slipping in the tranny. I wonder what will happen with fuel economy?
Thread
Thread Starter
Forum
Replies
Last Post
Fire Rescue124
3rd Gen High Performance and Accessories (5.9L Only)
5
07-09-2008 08:48 AM
Topper
3rd Gen High Performance and Accessories (5.9L Only)
6
03-03-2008 10:17 AM
Djasik
3rd Gen High Performance and Accessories (5.9L Only)
3
09-10-2007 12:51 AM
VikingDiesel
3rd Gen High Performance and Accessories (5.9L Only)
3
11-15-2006 12:24 AM
JIT
Performance and Accessories 2nd gen only
4
10-19-2006 09:55 PM