I havent heard much talk lately about the dual feed lines. Now that I have modded my FCA and gear pump cover I am wonderin if it is worth it?

Anybody care to speculate?
Anybody have any dyno proof?

 

Will, mail me one and I'll let you know april 21!

 

I couldn't tell by the sop meter but it did help out w/ not draining the rail as bad. It might pull a little harder on the top end, it's hard for me to tell.

 

Ha...Ha

tcr and #2, I never really thought it would be worth it before, but now with the "new" diy pump mod I am kinda thinkin it may be. Then again that 300 bones could be save for that floor it stage 2.

I dont know, just explorein options.

Oh and #2, I am very curious what you do on the 21st.
Honestly I dont know that your PEAK power will be that much higher (could be wrong though) but I bet your curve is a lot flatter.
good luck either way

 

im extremely interested in this now as well......

seems my rail doesn't get along with my right foot.

 

You still got an RV or did you cap it off?
Have you modded your FCA and gear pump cover?

 

still have RV

FCA isn't modded.....yet.

after seeing the Relentless Dual CP3 set up.....thats where i will spend my money...just don't have that much money right now

 

I agree, I am thinkin about it, but I may try one of Floor its stage 2s first. I dont think I will need dauls for quite a while.

Plus I need head studs, a smarty, and some ladder bars before I get some sticks and a pump(s).

I will say this. I didnt change a thing on my truck except for the FCA and pump cover. Tst on tt05, 5/3 and mp8 on25-30%, just like when I pulled into the shop. And for the 20 minutes it ran after the diy cp3 mod the buttometer says that my tourque curve had flattened out quite a bit and my truck pulled like never before, it was pretty much a frieght trane, until it died. So it may be worth thinkin about.

 

Wap, you just made me laugh by calling "Him" #2!!!!!!!!!

 

Heck, I thought thats what everbody called him??

 

Dont make me get out my voodoo doll of you Will, got a whole pile of pins sitting next to me!

Underpowered #1, stay out of this!

 

new mods on the way for me DIY cp3, dual feed line "compliments of out-of-here" and predator/puck stack and walbro. truck should make alittle more than 450 now

I dont know if the dual feed line will help at all II says it adds 38hp by itself..who knows

 

38hp?? I will believe it when I see the proof. I was just thinkin you might could run the tst a little higher and flatten that curve out even more. I am very interested in you dyno runs. Keep us posted.

Watch out with voodoo stuff man that bad joojoo.

 

#2, At least I respect myself enough to begin my name with a capital letter!!!!

 

I think he had his doll out. My stinkin rail cap didnt show up cause fedex dropped the ball. I guess my truck can sit another day.

#2 if you gonna be voodooin something just stick me with the pins and leave my truck alone