what companies have modded cp3 pumps out there for sale? and what should i expect from it? im running out of fuel badly up top. i checked it with my buddies scanner from my local dodge dealer and pressures are dropping to below 20,000 psi. going to up date my signature to help you guys out with what i got on the truck. i know this is a very fine line walked territory right now but i need help.

thanks
adam

 

floor it diesel has the CP3 mod its not cheap but if running high hp and fuel then its a great thing to have.

 

relentless sells a kit too.

 

I've been running a Floor It Stage I on stock injectors for a week with great results. No #s yet but soon. It behaves just like the stock one till you put your foot in it. More power with less smoke and much lower egts.
The stock pump can't support the 04.5 injectors.

 

the tst will dry any stock pump. the less smoke does not make sense to me, more fuel ,same air should be more smoke.

 

When the pressure drops, the Computer will increase duration trying to get the fuel in the cylinder but it ends up being too late to completely burn so it smoke real bad and gets hot.

 

I would think the higher rail pressure helps with fuel atomization, also, which translates into a cleaner burn

 

What about the fuel system before the cp3? If that can't deliver enough fuel, all the injection pump in the world won't help.