Ever since I put my TST on the commander will only read 23 psi. max. I've been using the remote on the TST for boost. I've got it set to back off at 34 psi and I can get to that in a heartbeat on the right setting. On acceleration both the Commander and TST boost reading will climb almost identically but the Commander stops at 23 and the TST keeps going. Any Ideas?
Woody

 

You need to move the blue wire on the Commander to the TST harness where it goes into the actual sensor.

 

Just splice the blue wire into the TST harness? (sorry if thats a dumb question)

 

Yep; the TST does boost fooling correct? That is your problem....

 

Sweet! I love quick fixes! I'm out of town but will do it when I get back.
Thanks guys!!
Especially to Quad for the answer in the weeeeee ours of the morning.