Whats better? Stainless steel or chrome ABS door handle/tailgate covers? do any fall off in cold weather?

 

I would do the billet replacement handles, the ABS chrome one's look chessy to me. and with ABS you could overtime develop the bubbling problem

 

I have the putco brand on my doors and tailgate not one problem yet I get alot of compliments I also am a clean freek about how my ride looks so I preasure wash it just about everyday at work in the wash bay and the handle covers still holding like the first I put them on a little cheaper on the wallet too

 

I priced both and went with the putco abs covers. That was a year and a half ago and no issues.

 

I thought mine were putcos but I'm not really sure. I pulled them off and they were stamped stainless. They'll stay on real good even when cold no problems there. Just clean the door handles with some alcohol pads before applying. I got tired of them and thought it was too much so off they came. Bent a couple of them pulling off otherwise they'd be in DTR classifieds for cheap.

 

I have the Putcos and they look great. Several months ago I was washing the truck and three of them came off in my hand the same day. I put some new 3M tape on them and they have been fine ever since. I check them all about once every couple weks to make sure they aren't loose now.....

 

Iv had the Putco covers on mine for about two years and they are holding up very nicely.
After washing the truck, I use compressed air to blow around the handles to eliminate any trapped water.
They havent budged.
I got mine from http://www.autotrucktoys.com

 

Another vote on the putco stainless. I had them on my 97 truck with no problems. Now have them on my 06 for bout 2yrs and they are sticken strong.