Trying to install a fuel pressure gauge {elec} in my 04 model ,I have got a banjo bolt but it does not screw into the h p pump ,Is this the right place to take the reading from ? and also have i got the right bolt It is a russel M12 X1.25 with 1/8 NPT female port , ? is there 2 or more diffrent thread types ? or have they sent me the wrong bolt . I have not tried it in the filter housing yet , any info would be greatley recieved

 

x2 on that question, i have a fuel pressure guage also i'm trying to hook up, any pictures also would be great

 

 

hey shakinredctd, so its the banjo bolt next to that electric plug right

 

It's the 1 on top, pointing up, that you use...
The 1 dead center of the pic...

 

ok great, now i'll be able to hook it up finally haha. thanks for all the help

 

This is where i tried to screw my banjo bolt , but it does NOT screw in , does anyone know what the CORRECT Thread? is i have a M12 X1.25 with a 1/8 female port , this is what i was led to beleive to be the right one , so somethings wrong , Are there 2 types? or have they sent me the wrong one ?the sender was quite stiff to screw in ,any help welcome here.Thanks