3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

1/4 mile times and DIY CP3

Thread Tools
 
Search this Thread
 
Old Aug 29, 2007 | 03:43 PM
  #1  
dieselkid6's Avatar
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 184
Likes: 0
From: Ohio
1/4 mile times and DIY CP3

without crazy larry runnin on extreme i ran a 14.1. CR is now installed so what should i expect..also i was looking into DIY Cp3 and found this article

http://relentlessdiesel.com/forum/viewtopic.php?t=19

Is there anything else i should know this article isnt saying..tricks etc.?
Reply
Old Aug 29, 2007 | 03:50 PM
  #2  
dodgezilla04's Avatar
Banned
 
Joined: Jun 2004
Posts: 0
Likes: 1
From: kingston,wa
nope. follow the directions clearly and the mod should take you 45 minutes. no worries. i have done several..
Reply
Old Aug 29, 2007 | 03:57 PM
  #3  
dieselkid6's Avatar
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 184
Likes: 0
From: Ohio
do i have to pull off the pump
Reply
Old Aug 29, 2007 | 04:12 PM
  #4  
OldSmokey's Avatar
Registered User
 
Joined: Apr 2004
Posts: 1,609
Likes: 0
From: Sturgis SD
Nope, just a few pieces off!
Reply
Old Aug 29, 2007 | 04:28 PM
  #5  
dodgezilla04's Avatar
Banned
 
Joined: Jun 2004
Posts: 0
Likes: 1
From: kingston,wa
you need to take the fca off, and the gear pump off the cp3. both easily accessible.
Reply
Old Aug 29, 2007 | 04:43 PM
  #6  
CReed's Avatar
Banned
 
Joined: Jan 2007
Posts: 1,616
Likes: 0
From: Cleveland, Tx/ Huntsville, Tx
We ran 13.30 @101 with the diy cp3 mod, diablo rkl stacker with tst. Its an 06 auto 4wd single cab of member xtremeflows. The truck has actually been faster since then we just havent had it to the 1/4 track lately and he recently found a new trick to making it leave even harder. Not sure if he picked up any with the mod besides maybe one level on the tst but its a quick easy mod so its worth it in my opinion.
Reply
Old Aug 30, 2007 | 10:45 PM
  #7  
mudslinger's Avatar
Registered User
 
Joined: Jan 2004
Posts: 360
Likes: 0
From: British Columbia
Zilla, I wish you were a little closer. I know you have had success with the mod, but I don't want to bugger my truck doing it myself. Maybe if you make it to BD this time I can borrow you for a while.
Reply
Old Aug 31, 2007 | 12:14 AM
  #8  
Luvnacumns's Avatar
Banned
 
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
Originally Posted by mudslinger
Zilla, I wish you were a little closer. I know you have had success with the mod, but I don't want to bugger my truck doing it myself. Maybe if you make it to BD this time I can borrow you for a while.
X2!!!! I'm alot closer and would really like to have Chris looking over my shoulder while doing this mod!!! Hint, Hint!!!! I am goona tackle it though... I knowwww "YOU STILL HAVEN"T DONE THAT MOD????
Reply
Old Aug 31, 2007 | 12:35 AM
  #9  
froggy69's Avatar
Registered User
 
Joined: Dec 2006
Posts: 39
Likes: 0
From: Houston,Texas
the truck creed is talking about moves for what it has.
Reply
Old Aug 31, 2007 | 04:35 AM
  #10  
OT-OF-Here's Avatar
Registered User
 
Joined: Apr 2004
Posts: 1,484
Likes: 0
From: St. Louis
Hmmmm!

Originally Posted by dieselkid6
without crazy larry runnin on extreme i ran a 14.1. CR is now installed so what should i expect..also i was looking into DIY Cp3 and found this article

http://relentlessdiesel.com/forum/viewtopic.php?t=19

Is there anything else i should know this article isnt saying..tricks etc.?
So with the Triple Dog on Performance and running a six speed you hit 14.1!!! Brother you can really row those gears. Congrats.
Reply
Old Aug 31, 2007 | 09:15 AM
  #11  
wap's Avatar
wap
Registered User
 
Joined: Aug 2005
Posts: 3,563
Likes: 1
From: Ga.
Originally Posted by dodgezilla04
you need to take the fca off, and the gear pump off the cp3. both easily accessible.
Unless you have a GDP fuel filter on the intake horn then it is kind of a pita but still not hard.
Reply
Old Aug 31, 2007 | 09:44 AM
  #12  
dodgezilla04's Avatar
Banned
 
Joined: Jun 2004
Posts: 0
Likes: 1
From: kingston,wa
will's correct about the filter under the intake horn. 1 of the trucks i've done had the filter, i just took it off, put it in a bag, did the mod and put the filter back on. added about 3 minutes.
shane, come on over. mudslinger, either at bd, my house, or maybe at Hoss's next bomb party. I will fix you up...
Reply
Old Aug 31, 2007 | 10:03 AM
  #13  
wap's Avatar
wap
Registered User
 
Joined: Aug 2005
Posts: 3,563
Likes: 1
From: Ga.
I thought of that Chris but when I did mine my filter was so tight I was begining to warp the filter itself and I didn have a spare handy so I just had to deal with it. Added about 45 min to the whole procedure.
Reply
Old Aug 31, 2007 | 12:42 PM
  #14  
gscmiller's Avatar
Registered User
 
Joined: Mar 2006
Posts: 98
Likes: 0
From: St. Charles, IL
Could some one explain what this mod's going to do for me if I try it? Sorry for bein such a newbie. Is this worth it if I dont have bigger turbo, injectors, pump etc.?
Reply
Old Aug 31, 2007 | 02:03 PM
  #15  
Rollin' Smoke's Avatar
Registered User
 
Joined: Apr 2007
Posts: 550
Likes: 0
From: LaPorte, TX
will this mod help a lightly modded 03? what should you expect after the mod? thanks in advance
Reply



All times are GMT -5. The time now is 09:41 AM.