3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

06 On the Fence, Do I really need extra gauges

Old Feb 9, 2006 | 08:34 PM
  #1  
Foxborough's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 808
Likes: 1
From: Rockford, Illinois
06 On the Fence, Do I really need extra gauges

I am a proud owner of a 06 Ram with an automatic (2500 miles). I will be towing my #6000 +/- boat between April and September. I usually drive 3-5000 miles for the season. Drive Wisconsin, Illinois, Missouri & Kentucky. The only transmission trouble was my last Suburban , (1999 POS). If I drive heads up do I really need more instruments? I can see if this rig was #10000 lbs or more. I could also see why I would not need it with #2000 boat. But with more power ,there will be more chance for heat buildup.
You folks have towed with these trucks with all kinds of weight. Should I add a transmission gauge and something else. Or just wait after this season.
I would appreciate your input.
Reply
Old Feb 9, 2006 | 08:37 PM
  #2  
BigBlue's Avatar
Banned
 
Joined: Feb 2002
Posts: 0
Likes: 0
If your planning on adding more power to it then yes, add a boost, egt, tranny temp gauge, and a fuel pressure gauge. If your staying stock, don't worry about it. DC built these trucks to do whatever you need them to and stay within tolerances.
Reply
Old Feb 9, 2006 | 08:59 PM
  #3  
Foxborough's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 808
Likes: 1
From: Rockford, Illinois
Thanks

I plan on staying stock. It is tempting to do. I plan justting sit back and enjoying this summer.
Reply
Old Feb 10, 2006 | 12:10 AM
  #4  
Syndicate's Avatar
Registered User
 
Joined: Sep 2005
Posts: 721
Likes: 0
Stock or not get an EGT and Trans guage. I towed with the truck bone stock and saw 1400* with about 8000lbs in the trailer. Mind you I was floored goin up a long grade blowin the doors off all the fords. Its cheap insurance. You paid a ton for the truck thow in a few more bucks for the guages. After all its not a Honda.
Reply
Old Feb 10, 2006 | 07:21 AM
  #5  
Foxborough's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 808
Likes: 1
From: Rockford, Illinois
Gauges

The only place to put two gauges would be between the overhead and rear view mirror.
Mounting them on the pillar, would eliminate the handle. Personally do not like the looks of it there.
Do not have the time to install the gauges. Could I get them and have the dealer install them? How could I find someone else that could do a good job. Does anyone know of a place around northern Illinois. I do not mind paying good money for a good job. The drilling and taping in the header & cutting the transmission cooling line is not real hard with the right tools. But a "rum-dumb" could really make a mess.
What about warranty, how it will affect that.
Reply
Old Feb 10, 2006 | 08:04 AM
  #6  
TPilaske's Avatar
Registered User
 
Joined: Aug 2002
Posts: 1,395
Likes: 0
From: Flat Rock, MI
I wouldn't worry about gauges w/ that amount of weight... unless you want to blow the doors off everyone going uphill like Syndicate...


Tony
Reply
Old Feb 10, 2006 | 08:05 AM
  #7  
bekim's Avatar
Registered User
 
Joined: Jan 2006
Posts: 473
Likes: 1
From: So. Cal.
Stock

Originally Posted by Foxborough
I plan on staying stock. It is tempting to do. I plan justting sit back and enjoying this summer.
stock's just fine for 6000lbs. You'll be just fine!
Bekim
###
Reply
Old Feb 10, 2006 | 08:23 AM
  #8  
Foxborough's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 808
Likes: 1
From: Rockford, Illinois
Thanks for the input folks

Can't wait till spring to go boating. It's killing me to see it snow again. We got something less than an inch last night. Not sure which will be more enjoyable, towing the boat or boating it self. Do not want to be down for maintence. Any information and experience helps. I am new to diesels and want to get set up for spring. Do all the work now so all I have to to in the summer is fill up toys with fuel, get them dirty and clean them up. Appreciate your insights.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
irocpractice
Other
10
Mar 16, 2012 11:01 AM
sqrl$$
3rd Gen Engine and Drivetrain -> 2003-2007
9
May 21, 2011 11:15 AM
forwardho
3rd Generation Ram - Non Drivetrain - All Years
5
Feb 11, 2007 06:45 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:52 AM.