should i buy
should i buy
Hello again thank u all for your help on me last post here is my quiesting i have found a 2008 dodge diesel 4x4 4 door 8 foot bed here in town with 150 thousand miles asking 23,000 is this a good deal and with that many miles i presume there all highway, tk came from texas is guess it was used to hall travile trailers but not sure,and with that many miles what should i look for any thing come to mind that might need replaced soon, and are these as good as the old 5.9 i have a 91 with over 200000 on it and it runs fine, would any of you have any reservation about buying this truck or should i just do it and quit worring about it haha thank you for your help, also does any one have the transfer switch on the dash and how do u like it? my wifes durango has it on the dash and the outher day i had troulbe getting it to disengaged thanks again
Administrator / Severe Concussion Aficionado
Joined: Jul 2008
Posts: 5,491
Likes: 15
From: Home: Kaplan, LA - Pipelining In: Pecos, Tx
That high milage I would pay careful attention to certain areas, but if it were well maintained and the price was right I would not hesitate to purchase.
Check all the ball joints and tie rod ends for wear. Make sure they have an impeccable service record on it.
You will be able to tell from the wear and tear how it was treated.
I have had no issues with my electronic T-Case switch. I too prefer a manual lever, but those are getting fewer and fewer.
And since there is no warranty....
DELETE!
Check all the ball joints and tie rod ends for wear. Make sure they have an impeccable service record on it.
You will be able to tell from the wear and tear how it was treated.
I have had no issues with my electronic T-Case switch. I too prefer a manual lever, but those are getting fewer and fewer.
And since there is no warranty....
DELETE!
hello cbrahs here is the vin number for the dodge but this one has 74000 and a year older, the outher one needs the front end rebuilt here is vin 3D7KS28A27G783992 thank you for your help
Thread
Thread Starter
Forum
Replies
Last Post
gscoker
3rd Generation Ram - Non Drivetrain - All Years
16
Feb 17, 2013 01:52 PM
tywebb3
Performance and Accessories 2nd gen only
3
Jun 23, 2006 11:30 PM



