Dodge Diesel - Diesel Truck Resource Forums

3rd Gen Engine and Drivetrain -> 2007 and up 6.7 liter Engine and Drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

help hub install question

Thread Tools
 
Search this Thread
 
Old Feb 14, 2011 | 02:17 PM
Share
  #1  
91.5 beater's Avatar
91.5 beater
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 435
Likes: 0
From: el paso Tx
help hub install question
i replaced the inner hub seal on left rear wheel, what is the proper way to reinstall the hub, it is hard to feel how much play the hub has with how tight the seal is.
Reply
0
Old Feb 14, 2011 | 05:50 PM
Share
  #2  
SpeedyWS6's Avatar
SpeedyWS6
Registered User
 
Joined: Feb 2008
Posts: 492
Likes: 0
From: Longview, Tx
22ft lbs while rotating hub, then back it off 30*. It's a good idea to pack the bearings with a little grease to prevent them running dry until the oil can work it's way back in.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Need help with fan hub bearing install
malittle
3rd Gen Engine and Drivetrain -> 2003-2007
2
Sep 13, 2012 12:15 AM
Hub! Hub! Hub!
Rafter B
1st Gen. Ram - All Topics
4
Jan 11, 2009 08:40 PM
EMS hub conversion with factory hub caps (pics)
DiEseLjunKy
3rd Gen High Performance and Accessories (5.9L Only)
32
Dec 27, 2007 07:37 AM
Hub Removal... Leave Hub Nut tight?
Crimedog
3rd Gen Engine and Drivetrain -> 2003-2007
5
Feb 27, 2007 10:39 PM
Dana 44 Manual Locking hub install??'s
97catintenn
HELP!
15
Feb 10, 2005 01:41 AM
Back to Subforum
3rd Gen Engine and Drivetrain -> 2007 and up
View Next Unread
DPF questions




Advanced Search

All times are GMT -5. The time now is 05:58 AM.