Cummins school bus swap questions. I'm capable of doing the work, so we got that part. Donor will be a 2008 school bus with 6.7 and receiving vehicle will be a 2008 f-250 V10 with auto trans. What's the issues with it being an industrial application? Problems I'm seeing at the moment are kits that are out there are made for dodge truck conversions only. I see wiring being an issue and the ability to tune the engine like it needs to be tuned per the ecm. Tell me straight up if this is a no go or it can be done

 

You might go to the Specialty Forums section under Cummins conversions lots of info there