you might want to check this wire loom, mine had rubbed through
Thread Starter
Registered User
Joined: Dec 2003
Posts: 325
Likes: 0
From: weston,wv
you might want to check this wire loom, mine had rubbed through
at the drivers side rear of the fake plastic valve cover the wifes '03 has a little metal bracket holding a wire loom
when tighted at the factory the loom was tightened against the valve cover right at the high pressure line warning sticker, the one with the picture of the hand getting cut in half
mine had rubbed through the protective coating, the electric tape inner wrap and had exposed a tan wire
all this with only 13k miles, another 13 would have bared the wire
when tighted at the factory the loom was tightened against the valve cover right at the high pressure line warning sticker, the one with the picture of the hand getting cut in half
mine had rubbed through the protective coating, the electric tape inner wrap and had exposed a tan wire
all this with only 13k miles, another 13 would have bared the wire
Thread
Thread Starter
Forum
Replies
Last Post
donhov
3rd Gen High Performance and Accessories (5.9L Only)
21
Oct 16, 2007 06:19 PM
NJDiverDan
3rd Gen Engine and Drivetrain -> 2003-2007
5
May 19, 2006 05:03 PM
papaduck
3rd Gen Engine and Drivetrain -> 2003-2007
9
Apr 8, 2003 12:00 PM