Trans work this weekend
#1
Registered User
Thread Starter
Join Date: Apr 2007
Location: Arizona
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Trans work this weekend
Getting ready to do some trans work this weekend. Governor pressure solenoid, transducer, and filter swap. Also going to install a drain plug in the pan. Looks like the work is pretty straight forward. Any tips or tricks I should know about? Where is the best location on the pan to put the drain plug? Some say on the side others say on the bottom.
#2
DTR 1st Sergeant
On the plug, differing opinions for different reasons; choose the one you are comfortable with and go with it.
I like the bottom, but I have a DD maghytec.
I like the bottom, but I have a DD maghytec.
#3
Registered User
Thread Starter
Join Date: Apr 2007
Location: Arizona
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Everything went as planned. What a difference in the way the trans works with the upgraded pressure solenoid. Nice firm shift and no more 1 and 2 shutter. Should had done this along time ago
Thread
Thread Starter
Forum
Replies
Last Post
lniemeyer2
4th Gen High Performance and Accessories 2010 and Up
2
07-22-2014 07:03 PM
BigGreen96
12 Valve Engine and Drivetrain
8
10-07-2010 07:35 PM
Ramtuff06
3rd Gen High Performance and Accessories (5.9L Only)
17
04-24-2008 06:16 PM