Alright last weekend I put a silver 62 on my truck. I updated smarty with the aftermarket turbo program. I wired in a 100 ohm resistor to the plug that was connected to the stock turbo, yet still getting this CE. Anything else I can do or should I take the sensor off the stock turbo plug it in and just tie it up?
thanks

 

You need a boost fooler. Here's Quadzilla's. He has excellent products.
http://www.quadzillapower.com/produc...st_fooler.html

 

My banks boost fools.

 

are you sure? i'm no 6 gun expert, but i thought banks products didn't do boost fooling- i know my bullet doesn't.

 

I think it does. I can hit 42psi with the 6 gun only but only 37 or so with smarty.

 

is that reading it off your pda, or a mechanical gauge?

 

I'm in the same boat, JPR Ram. I guess I will look at the quadzilla as well.

 

Its off the pda. I might try the stock sensor thing.

 

Took the sensor off the stock turbo and plugged in and the light comes on more with it connected than the resistor.