Steering question
#16
It's my pot and I'll stir it if I want to. If you're not careful, I'll stir your's as well!
Thread Starter
Maybe bit by bit you will end up with even more grease nipples. My truck cam from the factory with 2 grease nipples and now has 17, soon to be 18. The rear drive shaft u-joints was the first to get grease nipples. Have not done the front yet because the front drive shaft never turns unless I make it turn just to keep things free. Am a bit afraid of the u-joints rusting up due to lack of use, so engage the 4wd every now and then to spin the shaft for a few minutes.
Thread
Thread Starter
Forum
Replies
Last Post
skindaddy
3rd Generation Ram - Non Drivetrain - All Years
1
08-19-2009 08:51 PM
ocsurf16
3rd Gen Engine and Drivetrain -> 2003-2007
5
03-13-2006 09:24 PM
unioncreek
12 Valve Engine and Drivetrain
3
06-29-2005 02:00 PM
OHFarmboy
2nd Gen. Dodge Ram - No Drivetrain
7
02-25-2005 11:30 AM
Performance and Accessories 2nd gen only
6
06-05-2003 09:27 PM