How often do you need to adj. the valves 04?
Thread Starter
Registered User
Joined: Aug 2004
Posts: 26
Likes: 0
From: Sacramento
How often do you need to adj. the valves 04?
I may be 
but it seems that my vallve train is gitting very noisy @ 40k. even after it's warmed up. any thought on this subject.
ctd 04 auto 3:73 stock w/ airaid
but it seems that my vallve train is gitting very noisy @ 40k. even after it's warmed up. any thought on this subject.ctd 04 auto 3:73 stock w/ airaid
Registered User
Joined: Dec 2004
Posts: 380
Likes: 0
From: Elko, NV
I had mine done at 45,000 miles when I had the cam installed. At 55,000 miles I did it again myself this time just because I felt like it. In the end, you get the satisfaction that you did everything yourself, exactly how you wanted the valve lash set.
Incidentally, I helped a TDR member adjust his valves ln his '05 at 17,xxx miles and they were 0.002" to 0.003" loose compared to the recommended 0.010 intake/0.020 exhaust.
Yes, this is still within the service manual specifications, but now they are set exactly where he wants them set. Good enough reason for me too!
Incidentally, I helped a TDR member adjust his valves ln his '05 at 17,xxx miles and they were 0.002" to 0.003" loose compared to the recommended 0.010 intake/0.020 exhaust.
Yes, this is still within the service manual specifications, but now they are set exactly where he wants them set. Good enough reason for me too!
Registered User
Joined: Jul 2003
Posts: 208
Likes: 0
From: Carson City, Nv.
Originally Posted by JStieger
I had mine done at 45,000 miles when I had the cam installed. At 55,000 miles I did it again myself this time just because I felt like it. In the end, you get the satisfaction that you did everything yourself, exactly how you wanted the valve lash set.
Incidentally, I helped a TDR member adjust his valves ln his '05 at 17,xxx miles and they were 0.002" to 0.003" loose compared to the recommended 0.010 intake/0.020 exhaust.
Yes, this is still within the service manual specifications, but now they are set exactly where he wants them set. Good enough reason for me too!
Incidentally, I helped a TDR member adjust his valves ln his '05 at 17,xxx miles and they were 0.002" to 0.003" loose compared to the recommended 0.010 intake/0.020 exhaust.
Yes, this is still within the service manual specifications, but now they are set exactly where he wants them set. Good enough reason for me too!
Thread
Thread Starter
Forum
Replies
Last Post
Doug Crall
24 Valve Engine and Drivetrain
7
Mar 10, 2009 10:39 AM
