I was given an HE351 to swap into my 92. I took it apart to check it out and the center section of the exhaust housing has a small crack, is this common? Figure it must have ran hot. Other question is it says "Holset 1" on the compressor housing and my dads 07' has "holset 2" on his. is there any differences? Thanks for any info.

 

71 people have viewed this and no replies? Meant to write he351cw cracked. Does anyone know if there are different versions of the HE351CW?

 

Yes, there should be an HE351C.

 

Now you have 2 replies. Can you dig it?.

Since your rig is a '92-might try the 1st Gen section...........