Hi guys new here to the forum thought i could get some help. i bought a BD exhaust push pull swith for my 07 dodge with manual shift pulled dash apart ran my cable thru shifter boot, now after looking at factory switch don't know what wires to hook up and came with no instruction??? read somewhere on line that it runs thru ECM don't want to ruin things there. if anyone can help please give me your input. Thanks.

 

I would contact BD or go to their website and download instructions for the install.

 

Here's the wiring for the Jake switch if it helps. BD's switch is probably similar or can be interpreted.

 

Well i called BD performance that makes the switch and after letting him know my problem he say's it easy hook up. as he walks me thru it he says hook up the tan wire and ground the blk, i let him know that there is 6 wires there then he let's me know switch won't work on a 6.7 motor. BUMMER!!! don't know why they advertise it? oh well i will send it back. Thanks for the help guys.

 

Didn't realize you had a 6.7. My diagram was for the 5.9.
No data in Sig.

 

Sorry bout that. guess i'm stuck with the factory switch.

 

The shifter switch will not wire in with the 6.7 unfortunately.