3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Codes & turn signals not working?

Old Sep 11, 2008 | 07:57 PM
  #1  
dubster23's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 17
Likes: 0
Codes & turn signals not working?

Tried to turn on my four ways on the way home and only drivers side worked? Then a CEL came on. Tried turn signal to left right comes on the other way nothing? Codes P0336 and P2509 came up on smarty. Checked A/C area couldn't find anything rubbing, any other ideas?
Reply
Old Sep 11, 2008 | 08:54 PM
  #2  
dubster23's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 17
Likes: 0
Think I solved the problem, this place is a Lifesaver! Read about the multifunction switch so I jammed the wheel around and it started working. Anyone know how to fix/replace this or is it a dealer suited repair?
Reply
Old Sep 12, 2008 | 11:59 PM
  #3  
Utundra's Avatar
Registered User
 
Joined: Sep 2007
Posts: 300
Likes: 0
I said it before and I'll say it again. For the benefit of all please report these failures here, https://www-odi.nhtsa.dot.gov/ivoq/Consumer.cfm Too many threads with too many issues with signal and trailer lighting!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
97DodgeSmokin
2nd Gen. Dodge Ram - No Drivetrain
2
Jan 15, 2014 06:42 PM
Diesel Jeff
1st Gen. Ram - All Topics
3
Jul 13, 2008 06:01 PM
masterphreak
3rd Generation Ram - Non Drivetrain - All Years
12
Sep 25, 2007 12:01 AM
mayron
2nd Gen. Dodge Ram - No Drivetrain
3
Jan 25, 2005 03:41 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:15 PM.