3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Any problems using Amsoil ATF

Old Dec 29, 2004 | 07:31 PM
  #1  
cjones42's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 193
Likes: 0
From: CT
Question Any problems using Amsoil ATF

Has anyone had any problems using Amsoil ATF in the 48RE auto transmission ? I'm coming up on 60,000 and I'm thinking of switching to Amsoil ATF.
Reply
Old Dec 30, 2004 | 08:43 AM
  #2  
BarryG's Avatar
Registered User
20 Year Member
 
Joined: Aug 2002
Posts: 1,227
Likes: 50
From: Castle Rock, CO
I have been using amsoil atf in my 47re for 130k with no problems at all.
Reply
Old Dec 30, 2004 | 05:34 PM
  #3  
SuperGewl's Avatar
Registered User
 
Joined: Feb 2003
Posts: 1,915
Likes: 0
From: Beaverton, Oregon
The only problem I see is you waited too long. I switched mine at 3k miles. I had the dealer do the complete flush of the tranny. I wanted only the good stuff in there and yes it does make a big difference. The tranny temp runs much cooler and when I had the dealer do the 30 k miles tranny service there was no wear or band adjustments needed.
Reply
Old Dec 30, 2004 | 07:17 PM
  #4  
cjones42's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 193
Likes: 0
From: CT
Thanks for the input. But I would like to hear from guys with the 48RE. I was under the impression that there are considerably differences between the 47 and 48. I can't find anything on anyone else make atf+4. My major concern is my warranty. From what I've read DC won't cover any repairs if you use other fluids.
Reply
Old Dec 31, 2004 | 12:09 AM
  #5  
DF5152's Avatar
Registered User
 
Joined: Dec 2002
Posts: 741
Likes: 0
From: Long Island, NY
it will void your warrantee
Reply
Old Dec 31, 2004 | 08:05 AM
  #6  
deezulsmoke's Avatar
Registered User
 
Joined: Dec 2003
Posts: 360
Likes: 0
From: southern indiana
I would not use amsoil atf in the 48re. My 03' had the 48re and I was told that although amsoil says it can be used in place of the atf+4 fluid, it still lacks some of the additives that is in the atf+4 trans fluid, and chrysler will void your warranty. As of now, the only place I know you can get atf+4 is from a chrysler dealership.
Reply
Old Dec 31, 2004 | 08:40 AM
  #7  
Hannibal's Avatar
Registered User
 
Joined: Jul 2004
Posts: 566
Likes: 0
From: west central Florida
At $16.50 a gallon for ATF+4, why wouldn't you use the correct stuff and maintain your warranty?
Reply
Old Jan 1, 2005 | 03:51 PM
  #8  
MonkeyLips's Avatar
Registered User
 
Joined: Oct 2003
Posts: 379
Likes: 0
From: Star, Idaho
Originally posted by deezulsmoke
I would not use amsoil atf in the 48re. My 03' had the 48re and I was told that although amsoil says it can be used in place of the atf+4 fluid, it still lacks some of the additives that is in the atf+4 trans fluid, and chrysler will void your warranty. As of now, the only place I know you can get atf+4 is from a chrysler dealership.
Where did you get this information? As far as I know, Amsoil ATF meets or exceeds the ATF+4 rating requirments as established by DCX, so it will not void the warranty.
Reply
Old Jan 1, 2005 | 04:33 PM
  #9  
gsdog1's Avatar
Registered User
 
Joined: Sep 2003
Posts: 746
Likes: 0
From: USA
As I understand it, Amsoil ATF meets +4 requirements according to Amsoil. Amsoil ATF does not meet +4 requirements according to DC.

Matt
Reply
Old Jan 6, 2005 | 11:16 AM
  #11  
MonkeyLips's Avatar
Registered User
 
Joined: Oct 2003
Posts: 379
Likes: 0
From: Star, Idaho
The use of another make of ATF+4 transmission fluid is acceptable
providing if meets the specifications of ATF+4 transmission fluid.

The above is directly from DCX. I e-mailed them in regards to using Amsoil ATF+4.
Reply
Old Jan 6, 2005 | 12:50 PM
  #12  
kry226's Avatar
Registered User
 
Joined: Sep 2003
Posts: 470
Likes: 3
From: Germany
But again, you have to get DC to accept that Amsoil specifically meets the ATF+4 spec.
Get them to say that "Amsoil Universal ATF is an acceptable fluid," in writing and I am sure you'll raise a few more eyebrows. Good luck.
Reply
Old Jan 6, 2005 | 01:55 PM
  #13  
MonkeyLips's Avatar
Registered User
 
Joined: Oct 2003
Posts: 379
Likes: 0
From: Star, Idaho
Below is a reply from DCX. According to their response, and that Amsoil says it meets or exceeds Chrysler ATF+4, I'd have to say it sure looks like Amsoil Universal ATF is good to go.

In case anyone wonders why their reply says Dear William & I signed "Sam," I go by my middle name (Sam).

__________________________________________________ ________
Thanks again for the quick reply. I thought Amsoil made a specific
ATF+4 transmission fluid, but I see it is a "universal ATF" that covers many specifications.

Could you take a look at it here http://www.amsoil.com/products/atf.html and let me know if this product would have any impact in regards to the warranty of my 48RE? I appreciate you're help!

Thanks, Sam

__________________________________________________ _________

Dear William,

We recommend contacting the manufacturer of the transmission fluid you
are seeking to use to determine whether it meets specifications for
ATF+4.

Thank you again for your email.

__________________________________________________ __________
Reply
Old Jan 6, 2005 | 02:17 PM
  #14  
rossn2's Avatar
Registered User
 
Joined: Dec 2003
Posts: 539
Likes: 0
From: Ft Hood Texas
You misread DC's response. The problem is that the AMSOIL ATF is NOT "API CERTIFIED" and that's how/why DC will void the warranty. If your trans does fail, make sure you get a sample of the oil to send to Amsoil, so Amsoil can resolve the issue.
Reply
Old Jan 6, 2005 | 08:30 PM
  #15  
MonkeyLips's Avatar
Registered User
 
Joined: Oct 2003
Posts: 379
Likes: 0
From: Star, Idaho
Are any of the automatic transmission fluids API certified? Not that I have seen. I have a qt of Quaker State and a qt Pennzoil Dextron III/Mercon ATF in my garage. Neither have the API starburst symbol. So I guess that means everyone better use the manufacturers' fluid, no matter what the make, but then again, they are not API certified either...

I don't see how DCX could deny warranty coverage simply on the basis using Amsoil ATF. They said it, if it meets ATF +4 specs, it's fine. I have used it in Ford 1/2 & 3/4s (can't remember the trans numbers), 4L60E, 4L80E, 47RE, & AW4 with nothing but surpurb results.

Is there anyone out there that has had DCX deny warranty coverage based on using Amsoil ATF?
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:59 AM.