2005, QC, CTD, Auto, 4X4

I drove the truck towing last weekend and everything was fine. Drove it yesterday and lamp out indicator is lit. Check the lights and the following are out:
- LF low beam
- RF high beam
- LF turn signal
- LR brake/turn signal
- RF turn signal

I pulled one of the tail lights and as I suspected, the bulb is fine. Checked fuses, they are good too. Tried pulling codes using three clicks of the key, but got nothing back. Odometer never changed, I didn't even receive the end message. I won't have access to a real code reader until Tuesday. I looked around the engine compartment, but I didn't see anything jump out at me (e.g. frayed wires, squirrel nets, etc).

Any suggestions? Your assistance is greatly appreciated.

 

Check FCM/FCM connector.
FCM was the silver box mounted on IPM, the fuse box.

 

Power Distribution Center (fuse box) was bad. Replaced with a new one and everything is back to normal.