2004 48 RE ATS Transmission line pressure test
02-26-2008, 06:49 PM
#1
Registered User
Thread Starter
Join Date: Feb 2008
Location: Upstate New York
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
2004 48 RE ATS Transmission line pressure test
What should the results be of a line pressure test at idle and also at WOT?
idle = 75 - 85 psi?
WOT = 110+ psi?
In addition, with ATS torque converter and co-pilot what should the line pressure test be? Higher? What are the test numbers?
idle = 75 - 85 psi?
WOT = 110+ psi?
In addition, with ATS torque converter and co-pilot what should the line pressure test be? Higher? What are the test numbers?
02-27-2008, 08:21 AM
#3
Registered User
Join Date: Sep 2003
Location: Austin, TX
Posts: 3,188
Likes: 0
Received 0 Likes
on
0 Posts
WOT should be higher I would think, I know mine runs over 160-170 at WOT, your idle PSI looks fine. I could be wrong for your application, but tranny was built for a race application, and shifts very firm.
Thread
Thread Starter
Forum
Replies
Last Post
upjeeper
3rd Gen Engine and Drivetrain -> 2003-2007
11
07-30-2021 07:08 PM
Moobesor
3rd Gen High Performance and Accessories (5.9L Only)
7
02-27-2008 04:46 PM