I've got a 95 CTD with a big hole in the bed of the truck. I'd like to find a source for the bed repair panels (the dealer no longer sells them) and a chassis wiring harness as well. This truck was a victim of a number of trailer hitch installations and the harness is "toast". Any ideas who might provide these parts? Thanks Lektrikman

 

Try JC Whitney or LMC Truck for the bed panels. Painless Wiring for the harness. If cost an issue, you could strip what you need from a salvage yard truck. HTH

 

I have a complete rear harness sitting here. I bought it because I thought I had a wiring issue with my reverse lights, but it was a prong in the plug on the switch. The harness came from a 99 Dodge, not sure if it will work for you, but I believe it is the same. I'm sure someone will chime in.

 

In the South, you can somtimes find a complete and good SRW drive bed for $300 or so. Have been involved with replace on two that were very successful. Wiring harness at salvage yard. Find a PULL A PART type yard for best deals.