Whos Running A Leveling Kit?
02-17-2008, 11:16 AM
#1
Registered User
Thread Starter
Join Date: Dec 2005
Location: Malad/ Pocatello Idaho
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Whos Running A Leveling Kit?
HEY EVERY ONE. WHO OUT THERE IS RUNNING A 2-3" LEVELLING KIT?
I WANT TO RUN SOME 35's IF I CAN.
SO IS THERE ANYONE OUT THERE RUNNING 35'S WITH JUST A LEVELLING KIT?
BOB
I WANT TO RUN SOME 35's IF I CAN.
SO IS THERE ANYONE OUT THERE RUNNING 35'S WITH JUST A LEVELLING KIT?
BOB
02-18-2008, 07:39 AM
#4
Registered User
Join Date: Jun 2002
Location: Kansas City & Maysville, MO
Posts: 811
Likes: 0
Received 1 Like
on
1 Post
Whether and how much it rubs will depend a bit on what tires and wheels you use.
With stock wheels and 315/75-16 mud tires, my truck rubbed on the right control arm at full lock on the steering, and barely hit on the left control arm at full lock.
Once I installed a Thuren track bar and centered the axle, it rubs about the same amount on either side.
I don't think there's any way for it to rub anything other than the control arm, like sheet metal.
With stock wheels and 315/75-16 mud tires, my truck rubbed on the right control arm at full lock on the steering, and barely hit on the left control arm at full lock.
Once I installed a Thuren track bar and centered the axle, it rubs about the same amount on either side.
I don't think there's any way for it to rub anything other than the control arm, like sheet metal.
Thread
Thread Starter
Forum
Replies
Last Post
Rpainter
3rd Gen High Performance and Accessories (5.9L Only)
1
01-26-2008 12:27 AM
stock600
3rd Gen High Performance and Accessories (5.9L Only)
5
12-19-2007 09:38 PM
ocsurf16
3rd Gen High Performance and Accessories (5.9L Only)
21
09-11-2006 11:05 PM
HorseHauler
3rd Gen High Performance and Accessories (5.9L Only)
24
11-16-2004 06:01 AM