Replace broken a/c blend door, Will I need to pull out the HVAC completely?
09-28-2006, 09:01 AM
#1
Registered User
Thread Starter
Join Date: Sep 2003
Location: Foothills, NC
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Replace broken a/c blend door, Will I need to pull out the HVAC completely?
Last year I put a new a/c evaporator in my truck and didn't put the blend door in correctly. Its stuck in a blend postion, so I tried to use pliers at the motor to turn it and broke the stem off the door.
We'll now I want to replace the door. Would I have to pull the whole hvac out completely just to install the blend door? I hope I could just crack it open enough to install it. I don't remember the hvac housing configuration.
We'll now I want to replace the door. Would I have to pull the whole hvac out completely just to install the blend door? I hope I could just crack it open enough to install it. I don't remember the hvac housing configuration.
09-28-2006, 02:53 PM
#2
Registered User
Join Date: Jan 2004
Location: From Indiana work in Panama
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Blend door
I have a 98 and I have had it off before and I have to take it off again for the blend door being stuck in the A/C position. On the 98 at least I don't see how you can do it without taking the whole thing out. Joe
Thread
Thread Starter
Forum
Replies
Last Post
barttly
3rd Generation Ram - Non Drivetrain - All Years
3
07-18-2013 08:39 PM
JWillms81
3rd Generation Ram - Non Drivetrain - All Years
1
01-12-2008 09:57 AM
rvluversnc93
3rd Generation Ram - Non Drivetrain - All Years
4
03-05-2007 04:12 AM