Putting rotor/hub back on, question about some parts that "fell off"
11-03-2005, 04:45 PM
#1
Registered User
Thread Starter
Join Date: Jun 2005
Location: Pasadena, MD
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
Putting rotor/hub back on, question about some parts that "fell off"
Looks like a dust shield, a big round rubber o-ring? and this almost looks like a spacer type thing, round, thin.
What all is this junk, and do I need it? All mine pretty much just fell off.
Any part #'s? Thanks.
What all is this junk, and do I need it? All mine pretty much just fell off.
Any part #'s? Thanks.
11-03-2005, 08:05 PM
#3
Registered User
Thread Starter
Join Date: Jun 2005
Location: Pasadena, MD
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
This junk here:
Do I even need that stuff? If so, I need to replace it with new stuff as that is all rotted, or fallen apart. Is that top circle of rubber the rear seal to the hubs? If that is the case, what does that say for my hubs? Life is limited now? Or just keep it out of mud?
BTW, this is the hub of the other side, not the side of the stuff from the pic above.
Do I even need that stuff? If so, I need to replace it with new stuff as that is all rotted, or fallen apart. Is that top circle of rubber the rear seal to the hubs? If that is the case, what does that say for my hubs? Life is limited now? Or just keep it out of mud?
BTW, this is the hub of the other side, not the side of the stuff from the pic above.
11-03-2005, 09:20 PM
#4
Thats ugly, the backing plate for the brakes helps cool and block mud/debris etc from hitting the rotor.Personally I wouldent leave it off. The other looks like the gasket for the plate and the O ring ?? whats left of???? Hows them bearings feel?
11-03-2005, 09:44 PM
#5
Registered User
Join Date: Mar 2005
Location: Amherst, WI
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Very surprised on the condition of your parts for being from TX. My truck is a 98 and came from the Dallas/Fort worth area and all of those parts are still quite solid...
One side the shield was pretty much disintegrated. Going to need to find replacements for everything.
Thread
Thread Starter
Forum
Replies
Last Post
FordTrax
2nd Gen. Dodge Ram - No Drivetrain
2
03-26-2014 12:22 PM
FordTrax
1st Gen. Ram - All Topics
1
03-25-2014 10:58 PM
Devinraptor
3rd Gen Engine and Drivetrain -> 2003-2007
6
11-01-2010 09:44 PM