2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Lifetime hub-assemblies??

Thread Tools
 
Search this Thread
 
Old Jun 23, 2004 | 10:49 PM
  #1  
0akman's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 11
Likes: 0
From: TX
Lifetime hub-assemblies??

Hey guys, its probably been a year since Ive been on the site and Ive forgotten my user name and password so Im starting over, but anyway Im back for a while


Question, Ive seen in a few threads lately that some of you 4x4 owners are getting lifetime waranties on your hub-assemblies, is this correct? Ive been through 4 of them in the past 3 years and at $250 a pop, I flip everytime I hear a new squeak or squeal.

Ive been getting mine from Napa, but they claim they don't have lifetime warranty...any thoughts? Part #'s?

thanks
Chris
Reply
Old Jun 24, 2004 | 12:18 PM
  #2  
Eskimo's Avatar
Registered User
 
Joined: Dec 2003
Posts: 839
Likes: 0
From: Central PA
No offense, but with 10" of lift and 38's, I wouldn't honor a warranty on the hubs, either...
Reply
Old Jun 24, 2004 | 06:50 PM
  #3  
0akman's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 11
Likes: 0
From: TX
Yeah thanks a$$

Ive never taken the truck up there when I was buying them because it was usually disabled...

Any other insight?

thanks
Reply
Old Jun 25, 2004 | 09:18 AM
  #4  
Cowhand's Avatar
Registered User
 
Joined: May 2003
Posts: 1,515
Likes: 0
From: The 951-Flatbill center of the universe
I don't think they have a lifetime warranty, but rockauto.com has 'em for around $180 a pop IIRC.

I think I'm about due at 195K on the originals.
Reply
Old Jun 28, 2004 | 12:36 AM
  #5  
0akman's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 11
Likes: 0
From: TX
Thanks, Ill check them out. Sounds better than the $250 a pop Ive been paying...
Reply
Old Jun 28, 2004 | 11:12 AM
  #6  
kingofdodge7131's Avatar
Registered User
 
Joined: Dec 2002
Posts: 1,266
Likes: 0
Aights heres my questions. Do they make a hub assembly for the 2500 series thats kinda like on the 1500s, there the disk brakes are seperate from teh hub, instead of all one piece?
Reply
Old Jun 28, 2004 | 11:23 AM
  #7  
Cowhand's Avatar
Registered User
 
Joined: May 2003
Posts: 1,515
Likes: 0
From: The 951-Flatbill center of the universe
On the 2500, the rotor comes off of the hub. The wheel studs are driven through the hub into the rotor.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Gear Poet
24 Valve Engine and Drivetrain
1
Jun 18, 2009 05:44 AM
Rafter B
1st Gen. Ram - All Topics
4
Jan 11, 2009 08:40 PM
scooterj
2nd Gen. Dodge Ram - No Drivetrain
4
Apr 30, 2008 05:33 PM
thewished
Performance and Accessories 2nd gen only
40
Dec 15, 2007 09:36 PM




All times are GMT -5. The time now is 09:04 AM.