Ive got access to a mid-90's jeep with some nice electric/cloth seats. Anyone swapped something like this into the ram before?
When I patched up my floor I had the seats out and they came out as a unit because of the frame being one piece. Doesnt look like I can re-use the jeep seats without losing the center console unless I do some creative welding.

 

The floor mounts may not match up but I have found that the same manufacturer will use the same seat to seat base mounting locations on different vehicles. That way they just make the seat base different. Have you tried to see if the actual seats themselves will bolt on to the original seat base? If not it's often the easiest way to go.

 

i wouldnt use them. especially if they are from a cherokee. i have replaced 2 seat frames on both sides of my friends cherokee. both would always end up bending towards the center council. just my opinion but our factory seats are much stronger.