How wide it frame? Installing Flatbed
Thread Starter
Registered User
Joined: Mar 2006
Posts: 1,056
Likes: 0
From: Colorado
How wide it frame? Installing Flatbed
Ive looked all over the net and DTR. Ive found two answers.
I need outside to outside measurements so i get the right flatbed. Going to order it tonight. Do our frames get wider toward the back? My Chevy did.
Is it 34" or 37 3/4"?
It snowed 8in last night. I'm too lazy to roll around in the snow to measure.
Thanks
I need outside to outside measurements so i get the right flatbed. Going to order it tonight. Do our frames get wider toward the back? My Chevy did.
Is it 34" or 37 3/4"?
It snowed 8in last night. I'm too lazy to roll around in the snow to measure.
Thanks
DTR's Cow Boss
Joined: Sep 2003
Posts: 1,507
Likes: 2
From: Dufur Or
good choice after the deer issue I don't have any input on this thread but its the better of the choices for the insurance I wish some one would back in too my truck so I don't gotta pay for my flat bed next year 
the link is for 2001 trucks but you could do some poking around on here or even go by the same info should not have changed much
http://dodgeram.info/2001/dimensions.html
the link is for 2001 trucks but you could do some poking around on here or even go by the same info should not have changed muchhttp://dodgeram.info/2001/dimensions.html
Thread Starter
Registered User
Joined: Mar 2006
Posts: 1,056
Likes: 0
From: Colorado
Well, the C and C frame measurement is 37.7" Which is close to the 37.75" that I had found earlier.
I am guessing that the C and C are the same frame as regular pickups of that generation?
I am guessing that the C and C are the same frame as regular pickups of that generation?
Thread
Thread Starter
Forum
Replies
Last Post
itr.#1446
3rd Gen High Performance and Accessories (5.9L Only)
6
Apr 4, 2008 02:15 AM
chumstone
3rd Generation Ram - Non Drivetrain - All Years
1
Sep 30, 2007 11:06 AM
bryan07
1st Gen. Ram - All Topics
4
Jan 8, 2007 04:46 PM