Dies when placing in Reverse
#1
Registered User
Thread Starter
Dies when placing in Reverse
My friend with a second gen 12-valve 4x4 Auto has a problem.
This truck seems to die when placing the truck in reverse.
Anybody have any idea of might be going wrong?
I'm beginning to wonder if maybe the linkage might be grounding out on a wire?
I'll see him tomorrow so I'll pop the hood.
In the mean time, pointers or direction from you would be nice.
Thank You!
Tom
This truck seems to die when placing the truck in reverse.
Anybody have any idea of might be going wrong?
I'm beginning to wonder if maybe the linkage might be grounding out on a wire?
I'll see him tomorrow so I'll pop the hood.
In the mean time, pointers or direction from you would be nice.
Thank You!
Tom
#2
Registered User
check the idle speed !
mine dies when engine is cold and i am hot and turn on the ac and attempt a sharp turn when pulling out from parking space .
i like the slower idle speed and it is fine when engine is warm warm !
mine dies when engine is cold and i am hot and turn on the ac and attempt a sharp turn when pulling out from parking space .
i like the slower idle speed and it is fine when engine is warm warm !
#5
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
HOUTEX
Suggestions, Comments and Site Questions
4
08-24-2005 02:21 PM
ezdemon72
3rd Gen High Performance and Accessories (5.9L Only)
24
01-23-2005 12:27 AM