I'm trying to find out what i'm getting into with this, I've searched but not coming up with anything. At the front right axel tube were the wiring controls go into the tube I have a substantial leak. Is there a easy fix?
I'll be pressure washing it this afternoon and getting a better look at what is going on, I was just hoping to have a little of you guys knowledge when I start into it.
Thank you,
Scott

 

Could be as simple as a bad gasket, get the cover off and see what you find.

 

Probably just the seal for the vac controls, but IIRC it's open behind there with a seal at each end...