What do these mean?
Thread Starter
Registered User
Joined: Mar 2005
Posts: 108
Likes: 0
From: Valley Mills, TX
What do these mean?
For some reason I decided to check and see if there were any codes on my truck so I did the process to check them and came up with
P0500 & P1693
My truck is stock other than bhaf and straight pipe
What do these mean exactly and how do I clear them?
P0500 & P1693
My truck is stock other than bhaf and straight pipe
What do these mean exactly and how do I clear them?
Chapter President
Joined: Oct 2002
Posts: 4,983
Likes: 1
From: Sedalia, Texas
Look here: https://www.dieseltruckresource.com/...n&onlynewfaq=1
I don't know about the 1693.
Usually, disconnecting the battery for awhile will reset them. Also, around here, AutoZone will read and clear the code for you.
I don't know about the 1693.
Usually, disconnecting the battery for awhile will reset them. Also, around here, AutoZone will read and clear the code for you.
Registered User
Joined: Jan 2005
Posts: 915
Likes: 0
From: eastern pa
1693 is a companion code just saying you have a code with a prob.
Do you have a problems happening. I had the speed sensor prob and my abs light and parkin brake light was on in the dash and my speedo wouldnt work till 30 mph.
Its a little screw in s on the top of your pumpkin in the back you can get one at the dealer and it take 5 minutes tyo change, pop off wire take out 2 or3 bolts and unscrew it.
Do you have a problems happening. I had the speed sensor prob and my abs light and parkin brake light was on in the dash and my speedo wouldnt work till 30 mph.
Its a little screw in s on the top of your pumpkin in the back you can get one at the dealer and it take 5 minutes tyo change, pop off wire take out 2 or3 bolts and unscrew it.
Administrator
Joined: May 2002
Posts: 6,522
Likes: 4
From: Sandy, Utah
1693 is the code telling you there is a code.
0500 is the speed sensor.
If your speedometer and odometer are working, you most likely spun your tires and haven't started/stopped the truck the required number of times to clear the code.
phox
0500 is the speed sensor.
If your speedometer and odometer are working, you most likely spun your tires and haven't started/stopped the truck the required number of times to clear the code.
phox
Registered User
Joined: Apr 2004
Posts: 2,148
Likes: 0
From: New Meadows, Idaho
Re: What do these mean?
Originally posted by Wolff
For some reason I decided to check and see if there were any codes on my truck so I did the process to check them and came up with
P0500 & P1693
My truck is stock other than bhaf and straight pipe
What do these mean exactly and how do I clear them?
For some reason I decided to check and see if there were any codes on my truck so I did the process to check them and came up with
P0500 & P1693
My truck is stock other than bhaf and straight pipe
What do these mean exactly and how do I clear them?
Registered User
Joined: Nov 2002
Posts: 4,053
Likes: 29
From: lyman, utah
0500
as far as i know you can get rid of the 0500 code by disconnecting your batteries,but why bother? i can set a 0500 code just by revving the engine to any thing over an idle( for faster warmup ) i now have 0500,1693 codes
Thread
Thread Starter
Forum
Replies
Last Post
cumminsman02
Performance and Accessories 2nd gen only
3
Apr 29, 2005 09:02 PM
