Update on a old start/stall problem
Thread Starter
Registered User
Joined: May 2004
Posts: 259
Likes: 0
From: Toronto, Canada
Update on a old start/stall problem
Here is my original thread.
https://www.dieseltruckresource.com/...ad.php?t=90244
I finally found the problem, it was the ignition switch! The power to the RUN terminal would get cut off for a millisecond when the engine fired up and that caused the ECM shut the VP down.
Anyone having a stalling problem on start-up should look into the ignition switch.
https://www.dieseltruckresource.com/...ad.php?t=90244
I finally found the problem, it was the ignition switch! The power to the RUN terminal would get cut off for a millisecond when the engine fired up and that caused the ECM shut the VP down.
Anyone having a stalling problem on start-up should look into the ignition switch.
Thread
Thread Starter
Forum
Replies
Last Post
flyingd
12 Valve Engine and Drivetrain
17
Jul 11, 2017 11:13 AM
Dodgezilla
Suggestions, Comments and Site Questions
5
Nov 6, 2011 04:13 AM
chariotdriver
Fuels / BioDiesel / Diesel Prices
10
Oct 18, 2008 10:50 PM
JD730
12 Valve Engine and Drivetrain
6
Aug 2, 2005 11:33 AM