Power Loss
Thread Starter
Registered User
Joined: Jul 2010
Posts: 1
Likes: 0
Power Loss
'01 Ram..Flat surface, constant speed...Press accelerator...no speed increase!
Floor it (Kickdown) and normal power returns-usually immediately. I've also discovered that if I let up on the GO pedal for just a moment, then try again, normal power returns. When the event occurs, there is no immediate sensation. You only notice the problem when you try to accelerate after an interval of constant speed. The engine runs smooth - no dropped cylinder miss. HELP!
Floor it (Kickdown) and normal power returns-usually immediately. I've also discovered that if I let up on the GO pedal for just a moment, then try again, normal power returns. When the event occurs, there is no immediate sensation. You only notice the problem when you try to accelerate after an interval of constant speed. The engine runs smooth - no dropped cylinder miss. HELP!
Thread
Thread Starter
Forum
Replies
Last Post
RHC
3rd Gen Engine and Drivetrain -> 2003-2007
4
Aug 12, 2019 03:32 PM
Ranger 2/75
3rd Gen High Performance and Accessories (5.9L Only)
2
Mar 16, 2006 05:07 PM