Noise from bell housing area
Thread Starter
Registered User
Joined: Jun 2004
Posts: 179
Likes: 0
From: Manheim, Pa
Noise from bell housing area
This is a question from a 99 5.9 Gas engine...don't hate me for it. 
There are some very knowledgable people so that's why I'm asking... Are these flex plates known to crack? It's a 5.9 gas withe the 46RE tranny. 135k miles, not the original trans, this one is painted blue. I'm taking it out tomorrow night and if there is a common failure, I'm going to try to have the parts on hand so I can put it back together.
It's a rotational noise that changes with engine speed. Load doesn't affect it, just RPM's.
Thanks.
There are some very knowledgable people so that's why I'm asking... Are these flex plates known to crack? It's a 5.9 gas withe the 46RE tranny. 135k miles, not the original trans, this one is painted blue. I'm taking it out tomorrow night and if there is a common failure, I'm going to try to have the parts on hand so I can put it back together.
It's a rotational noise that changes with engine speed. Load doesn't affect it, just RPM's.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Racing_Joe66
Performance and Accessories 2nd gen only
2
Nov 27, 2006 09:10 PM
Halnrvs
3rd Gen Engine and Drivetrain -> 2003-2007
0
Mar 21, 2005 04:23 PM