Just put in new starter, noticed the hot stud loose
#1
Registered User
Thread Starter
Just put in new starter, noticed the hot stud loose
I just changed my starter for the 6th time in 15 yrs. 98 24v. 2x4. auto.
I noticed that the stud that the "hot" lead hooks to is not terribly tight. (noticed that while tightening my hot lead to it...I could make it spin?
This seems wrong to me. But I don't know what is inside... I am guessing it may be a part that you cannot get very tight for some reason or another.. Please chime in if you know... It starts fine, but is still on the jackstands.
I noticed that the stud that the "hot" lead hooks to is not terribly tight. (noticed that while tightening my hot lead to it...I could make it spin?
This seems wrong to me. But I don't know what is inside... I am guessing it may be a part that you cannot get very tight for some reason or another.. Please chime in if you know... It starts fine, but is still on the jackstands.
#2
Registered User
I just changed my starter for the 6th time in 15 yrs. 98 24v. 2x4. auto.
I noticed that the stud that the "hot" lead hooks to is not terribly tight. (noticed that while tightening my hot lead to it...I could make it spin?
This seems wrong to me. But I don't know what is inside... I am guessing it may be a part that you cannot get very tight for some reason or another.. Please chime in if you know... It starts fine, but is still on the jackstands.
I noticed that the stud that the "hot" lead hooks to is not terribly tight. (noticed that while tightening my hot lead to it...I could make it spin?
This seems wrong to me. But I don't know what is inside... I am guessing it may be a part that you cannot get very tight for some reason or another.. Please chime in if you know... It starts fine, but is still on the jackstands.
Thread
Thread Starter
Forum
Replies
Last Post
Bswope
12 Valve Engine and Drivetrain
5
04-11-2009 11:14 PM
megajoltman
2nd Gen. Dodge Ram - No Drivetrain
2
01-30-2008 02:10 PM
74dart
Performance and Accessories 2nd gen only
5
07-07-2007 07:58 PM