I think its in "limp mode?"
#1
Registered User
Thread Starter
Join Date: May 2003
Location: Bryan, Texas
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
I think its in "limp mode?"
after replacing my vp44 today, we tied everything back together bled the lines and cranked her up. after some tinkering i realized i had left the APPS unplugged. so i pulled the throttle off again and plugged the wire in underneath it. well it idles a lot better after the new VP44, but it has no power. barely gets me down the road is seems like. the check engine light is on and the only code is the P1963 on the dash. I tried to reset the comp by puling both neg batt cables for 30 min, but it still has the check engine light and no power. maybe try to reset the APPS sense I accidentally left it unplugged? any suggestions? thanks a lot in advance.
Thread
Thread Starter
Forum
Replies
Last Post
thenrie
3rd Gen High Performance and Accessories (5.9L Only)
6
06-29-2011 12:12 PM