fuel pump control module(fpcm)
Thread Starter
Registered User
Joined: Aug 2005
Posts: 2
Likes: 0
From: canton, michigan, usa
fuel pump control module(fpcm)
can the fpcm be relocated to the fender...and what that "box" on the drive side of the motor(5"x 8")...ecm? my first post WOO-WHOO! thanks for the info. j.
Administrator
Joined: May 2002
Posts: 6,522
Likes: 4
From: Sandy, Utah
No and yes.
Pretty sure the FPCM is physically attached to the VP44 and not seperateable.
ECM is mounted to the side of the engine (not a great place IMHO) and is the brains of the engine.
PCM is the Dodge computer and it is on the firewall, passenger side.
Oh, almost forgot, welcome to the board.
Have to assume you're talking of a 2nd generation 24 valve, since you posted in this section.
phox
Pretty sure the FPCM is physically attached to the VP44 and not seperateable.
ECM is mounted to the side of the engine (not a great place IMHO) and is the brains of the engine.
PCM is the Dodge computer and it is on the firewall, passenger side.
Oh, almost forgot, welcome to the board.
Have to assume you're talking of a 2nd generation 24 valve, since you posted in this section.
phox
Thread
Thread Starter
Forum
Replies
Last Post
N5IBM
Towing and Hauling / RV
1
Jun 3, 2006 12:00 PM