fluids?
05-18-2007, 08:45 AM
#2
Registered User
Join Date: May 2007
Location: Greenwood, IN
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
I'd say check the OEM manual on the Miles/time frame for a fluids change. It should have the Recommended Fluids too.
here's what mine ended up as
Front - Dana 60 - 75/90 synthetic
Rear - Dana 80 - 75/140 synthetic
Transfer - NV241D - synthetic
here's what mine ended up as
Front - Dana 60 - 75/90 synthetic
Rear - Dana 80 - 75/140 synthetic
Transfer - NV241D - synthetic
05-18-2007, 09:43 AM
#3
Registered User
Join Date: Jul 2004
Location: NEW YORK
Posts: 668
Likes: 0
Received 0 Likes
on
0 Posts
Tsutter....I just did my front, rear, NV5600 and transfercase. It was a little bit of an adventure but not too bad. I went with all synthetics too for that added bit of protection. My odometer read 69K and all fluids were clean still. I do work the truck but probably not as hard as some of those exposed to a farm environment.
Thread
Thread Starter
Forum
Replies
Last Post
Srigs
Performance and Accessories 2nd gen only
8
08-07-2003 06:29 PM
Max
3rd Gen Engine and Drivetrain -> 2003-2007
6
05-20-2003 10:02 PM