My friend has an '01 HO 6speed, he just burned his clutch up and is replacing it. Does he need to have his flywheel ground?, where is the bleeder on the clutch, is there any other valuable info he might need.
Thanks for any info
Paintpusher

 

TTT

 

have the flywheel ground/turned!!!!!!!!!!!!!!!!!!!!!!!!!
I dont think there is a bleeder on our systems....

 

Yes, have the flywheel turned, when I did mine, my flywheel was pretty trashed, so I just went to Cummins and bought a whole new flywheel (around $300.00 )
Usually any automotive machine shop can turn a flywheel ! No bleeder !
Good luck
Chip

 

Don't mess with the clutch hydraulics because you'll probably let air get in it, and they are a pain in the a** to try and bleed.