center support bearing

Reply Subscribe

Thread Tools

Search this Thread

Aug 26, 2006 | 04:01 PM

muddslinger

Thread Starter

Registered User

Joined: Nov 2005

Posts: 54

Likes: 0

From: south east Wisconsin

center support bearing

i have a lil play in mine. my ? is do i have to press this on and off the drive shaft or will it slide off and on the drive shaft with a lil help

Aug 26, 2006 | 04:12 PM

MedicShawn

Registered User

Joined: Dec 2003

Posts: 552

Likes: 0

From: Virginia

I'm pretty sure it gets pressed on. You could cut the old one off. I had one put on at NAPA that looks 2 piece. I'll see if I can find a PN.

Here's the PN I used from NAPA hb88508

Aug 26, 2006 | 04:29 PM

mgstroker95

Registered User

Joined: Jun 2006

Posts: 166

Likes: 0

From: The Woodlands

Yeah they are pressed on and I pain in the azz to get off! Also remember that there are 2 different bearings. I had the expensive one and the one that was almost an act of congress to find! Good luck.