Hello all, I just my kit in....not really hard, kinda time consuming. All back together, goes pretty good, but, it shifts low and early. Like 1-2 <10 mph @1400 rpm, and 2-3 <15 mph @ 1600 rpm. I talked to the company on adjusting it, he said to adjust the cable that goes from the throttle body to the trans. I tryed this, but, no change. It's a tough cable to adjust, the 'lock really only wants to go on where it was. It shifts good and firm, almost hard...but, that is good. Any thoughts?

 

hey piper,,if you go to dtt`s site,under the line pressure adjustment photos in the forums,,they show the screw to adjust for light throttle shifts on the valve body,if the cable adjustment didnt remedy your problem,,this may help you out......bama