24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

2002 crank but no start

Thread Tools
 
Search this Thread
 
Old Sep 30, 2010 | 07:27 PM
  #1  
Stormin_Norman's Avatar
Thread Starter
Registered User
 
Joined: Aug 2002
Posts: 191
Likes: 0
From: Montana
2002 crank but no start

I have a 2002 CTD, truck would not start after sitting for a week. I checked the fuel pressure and it was fine. I was thinking it was the VP44 had gone south. It turns out I had a blown door lock fuse, must have triggered the anti theft system ... new fuse and lock/unlock the doors fixed it. Thanks to my son finding the fuse all is good.

Thought I would post this in case anyone else runs into a crank but no start. I have to admit I was stumped for a bit.
Reply
Old Sep 30, 2010 | 09:03 PM
  #2  
TXcharger07's Avatar
Registered User
 
Joined: Oct 2008
Posts: 8
Likes: 0
hahaha you need an antitheft system in montana?

:P
Reply
Old Sep 30, 2010 | 09:37 PM
  #3  
KATOOM's Avatar
Registered User
 
Joined: Jan 2003
Posts: 4,179
Likes: 142
From: The "real" Northern CA
Thanks for the heads up. Checking fuses and relays is usually overlooked.
Reply
Old Oct 1, 2010 | 02:41 PM
  #4  
Stormin_Norman's Avatar
Thread Starter
Registered User
 
Joined: Aug 2002
Posts: 191
Likes: 0
From: Montana
Originally Posted by TXcharger07
hahaha you need an antitheft system in montana?

:P
No, it just came on the truck

I though it might give someone else a hint trouble shooting the same problem.
Reply
Old Oct 2, 2010 | 07:47 PM
  #5  
PowrStorkthsRam's Avatar
Registered User
 
Joined: Dec 2006
Posts: 64
Likes: 0
From: Southern Maryland
Wish my problem was that simple. The vp i had installed went out after 40+- miles and she would crank but wouldent start. Had it towed back to the shop that put the pump in and they had no clue what was wrong after 1 1/2 days so off to dodge for another $1600

Dodge told me they installed the pump worng because the first shop did not put the bracke on the bottom of the new pump or my edge burnt it up but it was set on stock no that wasnt the issue.......
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kydieseltech
24 Valve Engine and Drivetrain
3
Aug 7, 2015 08:07 AM
Big Ronnie
3rd Gen Engine and Drivetrain -> 2003-2007
2
Jun 19, 2015 08:03 PM
CoolumConst
3rd Gen High Performance and Accessories (5.9L Only)
9
Oct 11, 2008 10:00 PM
bsj04
HELP!
4
Feb 18, 2008 06:06 PM
Gunrunner
3rd Gen Engine and Drivetrain -> 2003-2007
0
Jun 13, 2007 11:26 PM




All times are GMT -5. The time now is 06:34 AM.