w250 guy

Ive been wanting to do a standard swap into my 90' since i got the truck and ive got the chance to get a zf6 out of a 2000 7.3 powerstroke, ive read about people doing it using the destroked adaptor and such but i want to know what else i would need to do to swap out my auto and throw this in? Clutches, t case, clutch cylinders etc... Any ideas?

Sent from my iPhone using IB AutoGroup

NE frmhnd

I've thought that would be a good swap, too, probably be easiest if you could go to u-pick-em and get all that stuff with it. Probably see something you wouldn't think of otherwise.

patdaly

Tcase could get interesting, I believe the Ford is a 31 spine? The 271 clocks to the other side ( drivers ) not sure if there is a Pass. 271.

It would be an expensive swap, would be much cheaper to get a G56 and not deal with the extra stuff.

w250 guy

Well i would be able to go to the truck and just say i need this this this and this, plus im a machinist so i can make some unobtainium parts haha

Sent from my iPhone using IB AutoGroup

Alec

Check out 4bt swaps. They have some good info on various transmission adaptations.

w250 guy

Yeah ill give them a look

Sent from my iPhone using IB AutoGroup

Montana2x2

Might be easiest to use a divorced 205 transfer case.