1bad93

defiantly was my first thought, but 15 bucks for a spacer and the manifold stays nice and unground. that was my thought.
jon

TLRMAN

Jon

Yes mounting the turbo up gave me the room to run the exhaust down and under the truck.

dieselJon

The only problem I see is the exhaust heating up the hot discharged air even more...

92betsy

The biggest problem I see is that it's not on my truck.

Lucas1

TLRMAN's setup may not be ideal but he say's it works and iam sure its way easier then the way i did mine.

DJ Turbo.

Well luck to you man and What Turbo's u runnin with?

1bad93

Thanks boss, but at the moment it would be my hx35/40 over a s472 but im strongly thinking of replacing the hx for a s300.
Jon

DJ Turbo.

I dunno I have heard good and bad about ATS but its your build and its twins and they are awesome haha

TLRMAN

JAyers

Jon I have my manifold flipped up also...it makes that downpipe much easier to run. Even though its not needed I crammed 5in down an out on mine.

1bad93

Yea I ended up flipping the manifold as well, worked like a champ. Now the charger fits, but like I was talking to you about the dang waste gate is right in the road. Well tonight Im gona try and fab up a diffrent mount for the wastegate and trim down the rod that goes from the pin on the exaughst side and goes into the wastegates dyaphram. So hopfully that will be all well here in the next day or so. Then can finally mount the primary and plum the chargers.
Jon

1bad93

well nothing really to report, got the hx mounted up and everything clocked were it needs to be. but unfornatly im waiting on the v band assemble for the outlet of the hx since holset figured they would make it a special size . but gona mess with getting the wastegate notched down tomaro.and makea mount to hold the s400 in place.
jon

TLRMAN

Jon

Stick with it.. Nothing ever fits the way you want it too.. I had to install and remove stuff several times before I was really happy with it.

1bad93

Oh its nothing I really didnt expect to happen, just have to work through it
jon

1bad93

well finally got everything to start getting stuff going this week. so me and my brother started fabing up the piping and mounting things. so with out futher yapping of me heres some pictures of it mounted up. will be working on making up a brace tomaro.