wheel issues
#1
Registered User
Thread Starter
wheel issues
ok so taday was a good day i got a set of alcoas from my dads friends 2nd gen. i sold the truck for him and he said if i sold it ic ould have the wheels if i swapped him my steelies. well the 2 rears went on without a hitch but the problem is my two steelies wont clear his caliper in the front. remeber his truck is 4x4 and mines 2x4 idk if that makes a difference. but the question i have is will 97 and earlier ford 4x4 wheels clear his caliper> i need those two wheels asap cause the truck leaves thursday. or what wheels that i can get from a junkyard for cheap will fit so that the buyer doesnt have issues and neither do i.
#2
Registered User
The only thing that is going to fit and not look goofy is another set of wheels off a second gen. truck.
The offset is way different than those on a 1st Gen.
Have you tried the 2nd Gen. wheels on your truck yet ??
The offset is way different than those on a 1st Gen.
Have you tried the 2nd Gen. wheels on your truck yet ??
Thread
Thread Starter
Forum
Replies
Last Post
ktmrdr85
3rd Gen Engine and Drivetrain -> 2003-2007
3
08-18-2008 09:56 AM
ian515
3rd Gen Engine and Drivetrain -> 2003-2007
17
03-26-2008 04:06 PM
danimal 95
3rd Gen High Performance and Accessories (5.9L Only)
14
12-07-2006 06:49 PM