Whats the pattern on a np205 ? the 93 we got is missing the **** insert and me and my dad don't know anything about 4x4's

im sure we could tell the difference if we just felt like going outside, jumpstarting the truck to drive it and tell the diff.

the stick is all the way back against the seat? is this 2wd

 

on my 89 all the way against the seat is 4wd. I will go look on my visor. Do yo still have the sticker on the drivers side visor?

 

4lo
n
2h
4h

 

thanks. all i needed to know.

either the seat is too far forward or its been in 4wd the whole time.

 

when the old lady drives (seat is all they way front) my truck the 4x4 shifter is against the seat. You would have know if you were in 4x4 if everything is working.

 

Also, there is no pattern to follow, the shifter moves straight forward and backward.

4HI back toward the seat.

2HI

N

4LO toward the dash.

 

IF your message center worked it would show when you were in 4X4...

 

And if it don't light up, the problem is usually dirty contacts at the transfer-case lever switch thingie.

 

, I needed to know the "pattern" or "order" (hows that?) on the **** becuase my dad may machine the insert for the ****.

 

That's too fancy; just pencil it on a strip of masking-tape and stick it on there.

 

good idea. (clap hands)

 

do you still have the factory sticker on the drivers side sun visor? That is where my sticker is

 

No sticker on the visor.

 

ok. Didnt know

 

OK, on the donor 91 IC truck I used for my RC, which was auto, the pattern was straight forward or back. On my 93 5speed, there is a gate from 4hi up to 2hi, so you can't hit nuetral, untill you move it to the right then up.