Im looking to get a beffier look for my truck but I am not sure how big a tire you can fit on a stock 2WD?

 

I would say 235/85/16's Thats whats on mine and they rub the fender at wheel lock on anything but a level surface.

 

235/85R16 is the stock tire size. I wouldn't expect them to rub if your springs aren't sagged! The largest tire I was able to use was 245/70R19.5 which is about 33.6" tall. They didn't rub, but I have m00g7226S springs with daystar spacers on top of them. They rubbed the sway bar when I put that on..

 

i have 265-75-16. about the same height as the 235-85, just wider. i like the look, i know i coudn't fit anything bigger.
kent

 

get rid of the two wheel drive and get a 4x,lol

 

I was thinking of putting some nice tall wide tires on back, maybe 315/75's and stay with 235/85's or 265/75's (whatever is cheaper) on the front.

I would like to drop my cruising rpm and figure this is cheaper and should look better than going with the 3.07 rear end. As long a the angle isn't too bad with the rear an extra 1.5" higher and I can get someone to put them on and inspect it with different size tires then I guess thats what I will do. Hopefully it will look alright.

 

There is a one inch difference on these two tire sizes. Here's a good reference site,

http://www.tirerack.com/tires/tirete....jsp?techid=53

 

looks like ill go with 265/75/16